<address id="x1fb9"><menuitem id="x1fb9"><meter id="x1fb9"></meter></menuitem></address>

    <form id="x1fb9"><th id="x1fb9"></th></form>

    <address id="x1fb9"></address>


        Arch Linux鏡像使用幫助

        收錄架構

        • i686
        • x86_64

        收錄版本

        • All

        使用說明

        編輯/etc/pacman.d/mirrorlist,在文件頂部加入以下行并注釋掉剩下的行

        Server = http://www.nucking.com/archlinux/$repo/os/$arch

        相關鏈接



        Arch Linux ARM鏡像使用幫助

        使用說明

        編輯/etc/pacman.d/mirrorlist,在文件頂部加入以下行并注釋掉剩下的行

        Server = http://www.nucking.com/archlinuxarm/$repo/os/$arch

        相關鏈接



        CentOS鏡像使用幫助

        收錄架構

        • i686
        • x86_64

        收錄版本

        • CentOS 5
        • CentOS 6
        • CentOS 7

        使用說明

        備份您的/etc/yum.repos.d/CentOS-Base.repo文件,選擇您使用的CentOS版本對應的文件,下載后放到/etc/yum.repos.d目錄下

        CentOS 5 配置文件右鍵另存為

        # CentOS-Base.repo
        #
        [base]
        name=CentOS-$releasever - Base
        baseurl=http://www.nucking.com/centos/$releasever/os/$basearch/
        #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os
        gpgcheck=1
        gpgkey=http://www.nucking.com/centos/RPM-GPG-KEY-CentOS-5
         
        #released updates 
        [updates]
        name=CentOS-$releasever - Updates
        baseurl=http://www.nucking.com/centos/$releasever/updates/$basearch/
        #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates
        gpgcheck=1
        gpgkey=http://www.nucking.com/centos/RPM-GPG-KEY-CentOS-5
         
        #additional packages that may be useful
        [extras]
        name=CentOS-$releasever - Extras
        baseurl=http://www.nucking.com/centos/$releasever/extras/$basearch/
        #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras
        gpgcheck=1
        gpgkey=http://www.nucking.com/centos/RPM-GPG-KEY-CentOS-5
         
        #packages used/produced in the build but not released
        [addons]
        name=CentOS-$releasever - Addons - www.nucking.com
        baseurl=http://www.nucking.com/centos/$releasever/addons/$basearch/
        #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=addons
        gpgcheck=1
        gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-CentOS-5
         
        #additional packages that extend functionality of existing packages
        [centosplus]
        name=CentOS-$releasever - Plus
        baseurl=http://www.nucking.com/centos/$releasever/centosplus/$basearch/
        #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus
        gpgcheck=1
        enabled=0
        gpgkey=http://www.nucking.com/centos/RPM-GPG-KEY-CentOS-5
         
        #contrib - packages by Centos Users
        [contrib]
        name=CentOS-$releasever - Contrib
        baseurl=http://www.nucking.com/centos/$releasever/contrib/$basearch/
        #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib
        gpgcheck=1
        enabled=0
        gpgkey=http://www.nucking.com/centos/RPM-GPG-KEY-CentOS-5

        CentOS 6 配置文件

        # CentOS-Base.repo
        #
        [base]
        name=CentOS-$releasever - Base
        baseurl=http://www.nucking.com/centos/$releasever/os/$basearch/
        #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os
        gpgcheck=1
        gpgkey=http://www.nucking.com/centos/RPM-GPG-KEY-CentOS-6
         
        #released updates 
        [updates]
        name=CentOS-$releasever - Updates
        baseurl=http://www.nucking.com/centos/$releasever/updates/$basearch/
        #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates
        gpgcheck=1
        gpgkey=http://www.nucking.com/centos/RPM-GPG-KEY-CentOS-6
         
        #additional packages that may be useful
        [extras]
        name=CentOS-$releasever - Extras
        baseurl=http://www.nucking.com/centos/$releasever/extras/$basearch/
        #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras
        gpgcheck=1
        gpgkey=http://www.nucking.com/centos/RPM-GPG-KEY-CentOS-6
         
        #additional packages that extend functionality of existing packages
        [centosplus]
        name=CentOS-$releasever - Plus
        baseurl=http://www.nucking.com/centos/$releasever/centosplus/$basearch/
        #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus
        gpgcheck=1
        enabled=0
        gpgkey=http://www.nucking.com/centos/RPM-GPG-KEY-CentOS-6
         
        #contrib - packages by Centos Users
        [contrib]
        name=CentOS-$releasever - Contrib
        baseurl=http://www.nucking.com/centos/$releasever/contrib/$basearch/
        #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib
        gpgcheck=1
        enabled=0
        gpgkey=http://www.nucking.com/centos/RPM-GPG-KEY-CentOS-6

        CentOS 7 配置文件

        # CentOS-Base.repo
        #
        # The mirror system uses the connecting IP address of the client and the
        # update status of each mirror to pick mirrors that are updated to and
        # geographically close to the client.  You should use this for CentOS updates
        # unless you are manually picking other mirrors.
        #
        # If the mirrorlist= does not work for you, as a fall back you can try the
        # remarked out baseurl= line instead.
        #
        #
         
        [base]
        name=CentOS-$releasever - Base
        #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os
        baseurl=http://www.nucking.com/centos/$releasever/os/$basearch/
        gpgcheck=1
        gpgkey=http://www.nucking.com/centos/RPM-GPG-KEY-CentOS-7
         
        #released updates
        [updates]
        name=CentOS-$releasever - Updates
        # mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates
        baseurl=http://www.nucking.com/centos/$releasever/updates/$basearch/
        gpgcheck=1
        gpgkey=http://www.nucking.com/centos/RPM-GPG-KEY-CentOS-7
         
        #additional packages that may be useful
        [extras]
        name=CentOS-$releasever - Extras
        # mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras
        baseurl=http://www.nucking.com/centos/$releasever/extras/$basearch/
        gpgcheck=1
        gpgkey=http://www.nucking.com/centos/RPM-GPG-KEY-CentOS-7
         
        #additional packages that extend functionality of existing packages
        [centosplus]
        name=CentOS-$releasever - Plus
        # mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus
        baseurl=http://www.nucking.com/centos/$releasever/centosplus/$basearch/
        gpgcheck=1
        enabled=0
        gpgkey=http://www.nucking.com/centos/RPM-GPG-KEY-CentOS-7
        
        

        最后運行yum makecache生成緩存

        相關鏈接



        CPAN鏡像使用幫助

        使用說明

        編輯Config.pm,在文件頂部加入以下行并注釋掉剩下的行

        'urllist' => [q[http://mirror.hust.edu.cn/cpan/]],

        或者安裝perl-CPAN模塊,然后運行cpan,按照以下提示選擇HUST鏡像CPAN源(HUST CPAN源已成為官方源):

         CPAN is the world-wide archive of perl resources. It consists of about
        300 sites that all replicate the same contents around the globe. Many
        countries have at least one CPAN site already. The resources found on
        CPAN are easily accessible with the CPAN.pm module. If you want to use
        CPAN.pm, lots of things have to be configured. Fortunately, most of
        them can be determined automatically. If you prefer the automatic
        configuration, answer 'yes' below.
        
        If you prefer to enter a dialog instead, you can answer 'no' to this
        question and I'll let you configure in small steps one thing after the
        other. (Note: you can revisit this dialog anytime later by typing 'o
        conf init' at the cpan prompt.)
        Would you like me to configure as much as possible automatically? [yes] no
        First, pick a nearby continent and country by typing in the number(s)
        in front of the item(s) you want to select. You can pick several of
        each, separated by spaces. Then, you will be presented with a list of
        URLs of CPAN mirrors in the countries you selected, along with
        previously selected URLs. Select some of those URLs, or just keep the
        old list. Finally, you will be prompted for any extra URLs -- file:,
        ftp:, or http: -- that host a CPAN mirror.
        
        (1) Africa
        (2) Asia
        (3) Europe
        (4) North America
        (5) Oceania
        (6) South America
        (7) (edit previous picks)
        Select your continent (or several nearby continents) [7] 2
        
        (1) China
        (2) India
        (3) Indonesia
        (4) Israel
        (5) Japan
        (6) Kazakhstan
        (7) Pakistan
        (8) Republic of Korea
        (9) Saudi Arabia
        (10) Singapore
        (11) Taiwan
        (12) Thailand
        (13) Turkey
        (14) Viet Nam
        (15) (edit previous picks)
        Select your country (or several nearby countries) [15] 1
        
        (1) ftp://ftp.cuhk.edu.hk/pub/packages/perl/CPAN/
        (2) ftp://mirror.communilink.net/CPAN/
        (3) ftp://mirrors.neusoft.edu.cn/mirror/cpan/
        (4) ftp://mirrors.ustc.edu.cn/CPAN/
        (5) ftp://mirrors.xmu.edu.cn/CPAN/
        (6) http://mirrors.btte.net/CPAN/
        (7) http://mirrors.devlib.org/cpan/
        (8) http://www.nucking.com/CPAN/
        (9) http://mirrors.sohu.com/CPAN/
        Select as many URLs as you like (by number),
        put them on one line, separated by blanks, hyphenated ranges allowed
        e.g. '1 4 5' or '7 1-4 8'
        

        (此處選擇8即可)

        相關鏈接



        Debian鏡像使用幫助

        收錄架構

        • i386
        • x86_64
        • source

        收錄版本

        • stable
        • unstable
        • testing
        • wheezy

        使用說明

        備份/etc/apt/sources.list文件,選擇您正使用的Debian版本,添加灰色框內的內容到/etc/apt/sources.list最前面

        選擇您的版本:

        deb http://www.nucking.com/debian/ version main contrib non-free 
        deb-src http://www.nucking.com/debian/ version main contrib non-free

        相關鏈接



        Fedora鏡像使用幫助

        收錄架構

        • i686
        • x86_64
        • source

        收錄版本

        • 15
        • 16
        • 17
        • 18
        • 19
        • Test

        使用說明

        備份您的/etc/yum.repos.d/fedora.repo和/etc/yun.repos.d/fedora-updates.repo文件,將下邊兩個文件放到/etc/yum.repos.d目錄下。

        fedora.repo

        [fedora] 
        name=Fedora $releasever - $basearch
        failovermethod=priority 
        baseurl=http://www.nucking.com/fedora/linux/releases/$releasever/Everything/$basearch/os/ 
        mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=fedora-$releasever&arch=$basearch 
        enabled=1 
        metadata_expire=7d 
        gpgcheck=1 
        gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$basearch 
         
        [fedora-debuginfo] 
        name=Fedora $releasever - $basearch - Debug
        failovermethod=priority 
        baseurl=http://www.nucking.com/fedora/linux/releases/$releasever/Everything/$basearch/debug/ 
        mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=fedora-debug-$releasever&arch=$basearch 
        enabled=0 
        metadata_expire=7d 
        gpgcheck=1
        gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$basearch 
         
        [fedora-source] 
        name=Fedora $releasever - Source
        failovermethod=priority 
        baseurl=http://www.nucking.com/fedora/linux/releases/$releasever/Everything/source/SRPMS/ 
        mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=fedora-source-$releasever&arch=$basearch 
        enabled=0 
        metadata_expire=7d 
        gpgcheck=1 
        gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$basearch 
        

        fedora-updates.repo

        [updates]
        name=Fedora $releasever - $basearch - Updates
        failovermethod=priority 
        baseurl=http://www.nucking.com/fedora/linux/updates/$releasever/$basearch/ 
        mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=updates-released-f$releasever&arch=$basearch 
        enabled=1 
        gpgcheck=1 
        gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$basearch 
         
        [updates-debuginfo] 
        name=Fedora $releasever - $basearch - Updates - Debug
        failovermethod=priority 
        baseurl=http://www.nucking.com/fedora/linux/updates/$releasever/$basearch/debug/ 
        mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=updates-released-debug-f$releasever&arch=$basearch 
        enabled=0 
        gpgcheck=1 
        gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$basearch 
         
        [updates-source] 
        name=Fedora $releasever - Updates Source
        failovermethod=priority 
        baseurl=http://www.nucking.com/fedora/linux/updates/$releasever/SRPMS/ 
        mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=updates-released-source-f$releasever&arch=$basearch 
        enabled=0 
        gpgcheck=1 
        gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$basearch
        

        最后運行yum makecache生成緩存

        相關鏈接



        Gentoo鏡像使用幫助

        收錄架構

        • All

        使用說明

        將如下行添加到/etc/make.conf文件中

        GENTOO_MIRRORS="http://www.nucking.com/gentoo/"

        相關鏈接



        Gentoo Portage鏡像使用幫助

        使用說明

        將如下行添加到/etc/make.conf文件中

        SYNC="rsync://www.nucking.com/gentoo-portage/"

        相關鏈接



        Raspbian鏡像使用幫助

        使用說明

        將/etc/apt/sources.list文件改成如下內容:

        deb http://www.nucking.com/raspbian/raspbian/ wheezy main non-free contrib
        deb-src http://www.nucking.com/raspbian/raspbian/ wheezy main non-free contrib

        相關鏈接



        Ubuntu鏡像使用幫助

        收錄架構

        • All

        收錄版本

        • Lucid Lynx(10.04)
        • Maverick Meerkat(10.10)
        • Natty Narwhal(11.04)
        • Oneiric Ocelot(11.10)
        • Precise Pangolin(12.04)
        • Quantal Quetzal(12.10)
        • Raring Ringtail(13.04)
        • Saucy Salamander(13.10)
        • Trusty Tahr(14.04)
        • Utopic Unicorn(14.10)

        使用說明

        手動更改配置文件(需sudo)

        /etc/apt/sources.list

        在文件最前面添加以下條目(其中的version需要替換為您正在使用的Ubuntu版本代號的名字,用以下按鈕選擇):

        選擇您的版本:

        deb http://www.nucking.com/ubuntu/ version main restricted universe multiverse
        deb http://www.nucking.com/ubuntu/ version-security main restricted universe multiverse
        deb http://www.nucking.com/ubuntu/ version-updates main restricted universe multiverse
        deb http://www.nucking.com/ubuntu/ version-proposed main restricted universe multiverse
        deb http://www.nucking.com/ubuntu/ version-backports main restricted universe multiverse
        deb-src http://www.nucking.com/ubuntu/ version main restricted universe multiverse
        deb-src http://www.nucking.com/ubuntu/ version-security main restricted universe multiverse
        deb-src http://www.nucking.com/ubuntu/ version-updates main restricted universe multiverse
        deb-src http://www.nucking.com/ubuntu/ version-proposed main restricted universe multiverse
        deb-src http://www.nucking.com/ubuntu/ version-backports main restricted universe multiverse

        相關鏈接


        香港经典三级 av视频在线免播放观看 电影大全免费观看